This guide covers assembly for Premier Garden Spinner designs that use a body strut assembly, fins, support pole, and ground stake. It applies to the Island Parrot, Party Dog, Turkey, Pirate Parrot, Surfing Parrot, Mermaid, and Cockatoo spinners.
Applies to: Island Parrot, Party Dog, Turkey, Pirate Parrot, Surfing Parrot, Mermaid, and Cockatoo Garden Spinners. See the 7 products this guide covers.
Product sizes
| Product | Size (W x L) |
|---|---|
| 33 in. Island Parrot Spinner - Happy Hour | 29 in. x 33 in. |
| Beach Bum - Party Dog | 24.5 in. x 30 in. |
| Cockatoo Bird Spinner | 33 in. x 43 in. |
| Mermaid Spinner | 28 in. x 38 in. |
| Pirate Parrot Spinner | 28 in. x 32.5 in. |
| Surfing Parrot Spinner | 35 in. x 20.5 in. |
| Turkey Spinner | 28 in. x 28 in. |
Assembly
Step 1: Open the fabric sleeve
The Strut Assembly of your Garden Spinner is in two pieces within the fabric sleeve of the body. Begin by unfolding this sleeve and opening all of the velcro closures along the exterior edge of the figure.
The velcro opening is along the exterior edge of the figure. Open those closures before moving the struts so the lower struts can pass through the opening shown in Diagram A.

Step 2: Insert the main strut into the hub
For Island Parrot, Party Dog, Turkey, Pirate Parrot, Surfing Parrot, and Mermaid, insert the main vertical strut into the hub from within the fabric sleeve of the figure (Diagram A). Slide lower struts at an angle through the opening and then shift to an upright position. Re-seal the velcro closures along the exterior edge of the figure.
The hub is inside the fabric sleeve, and the Wing Hub extends out from it on the Island Parrot, Turkey, Pirate Parrot, Surfing Parrot, Mermaid, and Cockatoo. On Party Dog, the same outside hub is labeled Tail Hub.
Tip: Cockatoo: insert the main horizontal strut into the hub.
Step 3: Attach the fins to the hub
Attach the fins to the hub. Please note that the fins are inserted at an offset pattern. (Diagrams B & C; Cockatoo: Diagram B) Make sure the fins are fully inserted into hub holes. You will hear a “click” sound when the pins are all the way in.
The fin pin goes into the hub holes on the hub; Party Dog uses a Tail Fin Pin and Tail Hub, and the other designs use a Wing Fin Pin and Wing Hub. The correct assembly keeps the fins offset; for Island Parrot, Party Dog, Turkey, Pirate Parrot, Surfing Parrot, and Mermaid, the “Wrong Way” view shows the fin placement not to use.
Tip: Party Dog: attach Tail Fins to Tail Hub. Cockatoo: use Diagram B for the offset pattern.
If a fin is placed incorrectly
If you make a mistake in the placement of the Wing Fins (i.e. backward, wrong color sequence etc.), you can remove them by carefully inserting a small flat end screwdriver between the base of the Wing Fin Pin and the hub and pushing it up and out. Party Dog: this note refers to Tail Fins and the Tail Fin Pin.
Mount the spinner
Step 4: Install the ground stake and support pole
Drive Ground Stake into ground. Slide Support Pole into Ground Stake. Slide Main Hub Assembly with Garden Spinner over Support Pole Ferrule. If you desire extra height, add the extra ground shaft included in this package. (Diagram D; Cockatoo: Diagram C)
In Diagram D, the Ground Stake sits in the ground, the Support Pole slides into it, and the Support Pole Ferrule sits at the top of the Support Pole. The spinner’s main hub assembly slides over that ferrule.
Tip: Cockatoo: see Diagram C for this support-pole assembly.
Care
Although your Garden Spinner is constructed with UV resistant SunTex™ fabric, to preserve its durability, we recommend taking the Spinner inside during harsh weather or when not in use. Cockatoo: the fabric is UV resistant SolarMax™ fabric, and you should take it inside during storms and harsh weather to preserve its durability.
Products this guide covers
Beach Bum - Party Dog
Cockatoo Bird Spinner
Mermaid Spinner
Pirate Parrot Spinner
Surfing Parrot Spinner
Turkey Spinner
33 in. Island Parrot Spinner - Happy Hour
Download the original manuals
Premier prints a manual for each design; the steps are the same apart from the differences noted above.


Share:
Garden Charm School of Fish Instructions
Giant Bald Eagle Kite Assembly Instructions