This guide covers assembly for Premier WindGarden 12 in. and 16 in. Hot Air Balloons. No inflation is needed for these spinning hot air balloons. See Video.

Applies to: Premier WindGarden 12 in. and 16 in. Hot Air Balloons. See the 23 products this guide covers.

Sizes

Balloon type Balloon size Twister tail
12 in. 6.5 in. x 12 in. 20 in.
16 in. 12 in. x 16 in. 30 in.

Assembly

Step 1: Insert A into B

Insert (A) into the holes in (B) one at a time.

At the top of the balloon, B is the round piece with holes. Work around it one hole at a time, inserting each A before moving to the next one.

Hot Air Balloon panels with A inserted into holes around B
A/B: Insert A into the holes in B one at a time.

Step 2: Check the panels

Check that all of (A) are placed correctly into (B) with no errors or crossed panels.

Look around B before pushing the panels upward. The panels should each run cleanly to B without crossing another panel.

Step 3: Push the panels upward

Once all (A) are correctly inserted into (B), push all panels upwards so they touch (B).

Bring the panels up to meet B. When finished, the balloon forms a rounded hot-air-balloon shape above the base.

Hot Air Balloon with panels raised into the rounded balloon shape
Panels pushed upward into the finished balloon shape.

Care

It is recommended that you take your Hot Air Balloon inside during harsh weather to preserve durability.

Products this guide covers

Download the original manuals

Premier prints a manual for each design; the steps are the same apart from the differences noted above.

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.