This guide covers assembly of the Premier Ruby-Throated Hummingbird Spinner. It follows the manufacturer’s instructions for connecting the body, wing fins and ground shaft.

Applies to: 37 in. Ruby Throat Hummingbird Spinner. See the 1 products this guide covers.

Product specs

Model Spinner platform Size (W x L)
37 in. Ruby Throat Hummingbird Spinner Traditional Bird 37 in. x 32 in.

Assembly

Step 1: Attach the front body half

Attach the Front Body Half of the Hummingbird to the Main Hub by sliding the square rod (from within the Front Body Half) into the square aluminum ferrule in the main hub.

The square rod is inside the Front Body Half near the bird’s head and body. Slide it into the square aluminum ferrule on the Main Hub so the Front Body Half meets the hub.

Ruby-Throated Hummingbird Spinner assembly diagrams for body, wing fins and ground shaft
Ruby-Throated Hummingbird assembly diagrams

Step 3: Close the Velcro openings

Close Velcro openings on the Front Body Half.

The Velcro closures are along the body opening near the Wing Hub. Close the openings after the Front Body Half is attached to the Main Hub.

Step 4: Attach the wing fins

Attach Wing Fins to Wing Hub. Please note that Wing Fins are inserted at an offset pattern. Make sure Wing Fins are fully inserted into hub holes. You will hear a “click” sound when the pins are in all the way.

The Wing Fin Pin goes into the hub holes on the Wing Hub. The wing fins are offset from one another around the hub, not lined up straight across from each other.

Tip: If you make a mistake in the placement of the Wing Fins (i.e. backward, wrong color sequence, etc.), you can remove them by carefully inserting a small flat end screwdriver between the base of the Wing Fin Pin and the hub and pushing it in and out.

Step 5: Install the ground stake and shaft

Drive Ground Stake into ground. Slide Ground Shaft into Ground Stake. Slide Main Hub Assembly with Garden Spinner over Ground Shaft Ferrule. If you desire extra height, add the extra ground shaft included in this package.

The ground stake is in the ground with the Ground Shaft standing upright above it. The Ground Shaft Ferrule is at the top of the shaft where the Main Hub Assembly with Garden Spinner slides on.

Care and storage

Although your Garden Spinner is constructed with UV resistant SolarMax™ fabric, to preserve its durability, we recommend taking the Spinner inside during harsh weather or when not in use.

Products this guide covers

Download the original manual

Ruby-Throated Hummingbird Spinner Assembly Instructions (PDF)

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.