This guide covers assembly and flight instructions for Premier X-Delta 6.5 ft. delta kites. It applies to the Pattern Rainbow and Rainbow Arrows designs.

Applies to: 6.5 ft. Delta Kite - Pattern Rainbow and Rainbow Arrows. See the 2 products this guide covers.

Specs

Designs Size Wind range Line Frame Fabric
Pattern Rainbow; Rainbow Arrows 79 x 40 in. / 201 x 102 cm. 4 ~ 20 mph Includes 300 ft. 50 lb. Test Line Fiberglass Ripstop Polyester

Assembly

Step 1: Unroll the kite

Unroll Kite.

The later diagrams identify the back of the kite for the pockets and the front of the kite for the keel and tow point. Unroll the kite so those areas are accessible.

Step 2: Identify and organize the struts

Identify and organize struts.

The struts are labeled as the Cross Strut and the Spine. Keep those two parts identified by name before you install the spine.

X-Delta cross strut and spine labeled for assembly
A: Cross Strut and Spine.

Step 3: Insert the spine

Insert the Spine into the Nose and Tail pockets. Please note that the Cross Strut should be on top of the Spine.

On the back of the kite, the nose pocket is at the top point and the tail pocket is at the bottom center. The cross strut runs across the kite into the cross strut pockets, and the enlarged view shows the cross strut over the spine.

X-Delta back of kite with spine, cross strut, and pockets
Back of Kite: spine, cross strut, and pockets.

Step 4: Attach the flying line

Attach the flying line to the tow point on the front of the kite.

The tow point is on the front of the kite at the keel. The front view shows the keel just right of center, with the tow point near its upper end.

X-Delta front of kite with keel and tow point
Front of Kite: keel and tow point.

Your kite is now ready to fly!

Flight instructions

Step 1: Attach the flying line

Attach flying line to Tow Loop.

The front of the kite shows the tow point on the keel. Use the attachment point on the front of the kite.

Step 2: Position your helper

Have a friend stand about 75 ft. downwind from you and hold the kite with its Leading Edge pointed towards the sky.

Stand with your back to the wind. Your friend should be downwind from you, holding the kite with the leading edge pointed toward the sky.

Step 3: Release the kite

As the wind catches the kite, signal your friend to release it while you bring in the line with long steady pulls.

Step 4: Let out line

Slowly let out more line as the kite flies upward.

Line and wind

Recommended line: 50 lb test line.

Best wind for X-Delta kites: 4-20 mph.

X-Delta optimum wind chart marked from 4 to 20 mph
Optimum wind conditions for X-Delta.

Wind note

Wind conditions aloft may vary considerably from those found near ground level.

Products this guide covers

Download the original manual

X-Delta Assembly Instructions (PDF)

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.