This guide covers assembly for Premier 18 in. Hot Air Balloon spinners. It applies to the 18 in. rainbow, vintage and patriotic hot air balloon designs listed below.
Applies to: 18 in. Hot Air Balloon spinners: Checkered Rainbow, Chevron Rainbow, Red Vintage, Victorian and Vintage Patriotic. See the 5 products this guide covers.
Assembly
Step 1: Check the partial assembly
Your 18" Hot Air Balloon comes partially assembled with the 10 body panels already connected to the lower wooden basket.
The bottom end of the body panels is already connected to the basket. The upper hub is at the top, with small holes around it for the fiberglass rods.

Step 2: Insert the fiberglass rods
Begin assembly by inserting fiberglass rods of the body panels one at a time into the small holes in the upper hub. When inserting the rods it is important to make sure they go all the way to the bottom of the hole.
Work with one body panel rod at a time and place each rod into an empty hole in the upper hub. The rod should run from its body panel up to the hub without crossing another body panel.
Step 3: Work around the hub
Work your way with the fiberglass rods around the hub making sure that no holes are skipped or body panels crisscrossed.
Keep the body panels in order as you move around the hub. Each hole around the hub should receive a fiberglass rod.
Step 4: Push the panels upward
Once all the fiberglass rods are in the hub, push the panels upward so they all neatly touch the hub.
When assembled, the panels form the rounded hot air balloon shape above the basket. The completed balloon has the body panels meeting neatly at the upper hub.

Products this guide covers
18 in. Hot Air Balloon - Checkered Rainbow
18 in. Hot Air Balloon - Red Vintage
18 in. Hot Air Balloon - Victorian
18 in. Hot Air Balloon - Chevron Rainbow
18 in. Hot Air Balloon - Vintage Patriotic



Share:
14 ft. Delta Kite Assembly Instructions
19 ft. Delta Kite Assembly Instructions