This guide covers basic setup and flying for the Premier 7 ft. Shark Kite. Use this guide for the black 7 ft. Shark Kite with the head stiffener strut shown in the manual.
Applies to: 7 ft. Shark Kite - Black. See the 1 products this guide covers.
Specs
| Model | Size | Wind range | Line | Frame | Fabric |
|---|---|---|---|---|---|
| 7 ft. Shark Kite - Black | 55 x 83 in. / 140 x 211 cm. | 5 ~ 18 mph | Includes 300 ft. 30 lb. Test Line & Winder | Fiberglass | Ripstop Polyester |
Before you fly
- Easy to fly & assemble.
- Uses 30 lb. Test Line.
- Wind Range: 5 - 18 mph.
Get ready
Step 1: Insert the cross strut
Insert the cross strut into the pockets at the leading edge.
Work on the back of the kite. The cross strut runs across the kite near the wings and fits into the pockets at the leading edge.
Step 2: Install the head stiffener strut
Bend head stiffener strut and slip into strut opening. Push strut all the way down into sleeves.
The head stiffener strut sits in the kite head, with a strut opening on each side near the top of the back of the kite. The spine strut runs down the center of the head, with the head stiffener strut curved across the head.
Step 3: Attach the flying line
Attach your line to the tow point.
The tow point is on the front of the kite, near the center of the body between the wings. Attach your line at that tow point before launching.
To fly
Step 1: Position your helper downwind
Have a friend stand about 75 feet downwind from you and hold the kite with its nose pointed towards the sky.
Stand so the wind is at your back. Your friend should be downwind and hold the kite with its nose pointed toward the sky.
Step 2: Release and pull in line
As the wind catches the kite, signal your friend to release it while you steadily pull in line until the kite is aloft.
Keep a steady pull on the line as your friend lets go. The kite should rise as the wind catches it.
Step 3: Let out more line
As the kite flies upward, slowly release more line.
Feed out line gradually as the kite climbs. Stay within the stated wind range for the kite.


7 ft. Shark Kite - Black
Share:
6.5 ft. Wind Generator Assembly Instructions
80 in. Travel Delta Kite Assembly Instructions