This guide covers attaching the Premier Ram Air Cat to a lifter kite’s flying line. It applies to the black and orange Ram Air Cat line devices for kites.
Applies to: Ram Air Cat Line Device for Kites - Black and Orange. See the 2 products this guide covers.
Specifications
| Model | Size | Fabric | Frame | Line |
|---|---|---|---|---|
| Ram Air Cat | 10.5 ft. / 320 cm | Ripstop Polyester | Frameless | Not Included |
Attachment steps
Step 1: Move toward the lifter kite
Tie off the kite, or have someone hold the line for you, while you walk several yards towards the lifter kite. (diagram A)
Keep the lifter kite’s flying line under control before you start attaching the Cat. The Cat is positioned below the flying line while you work several yards up the line from the winder.

Step 2: Attach the head line
Attach the line that connects to the head to the flying line. (diagram A)
The head connection is the line that connects to the head. The close-up places that attachment around the flying line, with the Cat hanging below it.
Step 3: Attach the mouth and paws line
Walk back about 6 feet towards the winder and attach the line that connects to the mouth and paws to the flying line. (diagram B)
The 6 ft. spacing is between the head attachment point and the mouth-and-paws attachment point. The mouth and paws share the attachment line shown running up to the flying line.

Step 4: Attach the tail line
Attach the line that connects to the tail to the flying line. Tail connection should be about 24 feet behind the Head connection. (diagram B)
Diagram B marks the 24 ft. distance from the Head connection to the Tail connection. The tail line runs from the Cat’s tail back to its attachment point on the flying line.
Step 5: Release the lifter kite line
Release the flying line of the lifter kite. (Diagram C)
Once released, the Ram Air Cat flies below the lifter kite’s flying line. The lifter kite remains above the Cat on the same flying line.

Flying tips
Please note due to variable wind conditions and lifter kite flying angles the three Ram Air Cat attachment points may vary from the measurements above.
After launch watch your Cat and make final adjustments if necessary.
The Cat's tail should be almost straight up from the body with front paws fully outstretched in front like the real animal.
Please note if the ball's bridle lines become tangled, simply untie, untangle and reattach.


Ram Air Cat Line Device for Kites - Black
Ram Air Cat Line Device for Kites - Orange
Share:
Pterodactyl Assembly Instructions
Red Baron Tri-Plane Kite Assembly Instructions