This guide covers assembly for the Solar Flower - Water Lilly solar floral stake. Assemble the hub, petals, and ground shaft before using the solar stake outdoors.
Applies to: Solar Flower - Water Lilly. See the 1 products this guide covers.
Assembly
Step 1: Install the hub
Drop hub with drilled holes into upper pole shaft. Secure top with end cap.
Drop the hub with drilled holes into the upper pole shaft. Secure the top with the end cap. The row of drilled holes remains around the hub for the petals.

Step 2: Insert the petals
Insert the 6 petals by inserting one tab of each petal in the lower row of holes, and the opposite tab in the top row of holes, so that the petal is fixed at a slight angle. Push hard to secure. The petals should slightly overlap one another.
Use one lower hole and the opposite upper hole for each petal. Work around the hub so the six petals sit at a slight angle and overlap slightly.

Step 3: Check the flower
With all 6 petals now inserted into the upper and lower rungs of holes, you have created a beautiful Water Lily.
From above, the finished flower shows six petals arranged around the center.

Step 4: Install the ground shaft
Insert the finished pole into the ground shaft with pointed tip and drive it into soft ground. The Water Lily adorns your garden during the day and glows in different colors at night!
The ground shaft is the section with the pointed tip. Use soft ground.
Battery check
Be sure to check your factory preinstalled batteries to see if they are still working. If not, replace batteries before using the solar stake.



Solar Flower - Water Lilly
Share:
Solar Flower - Rose Assembly Instructions
Speedboat Garden Spinner Assembly Instructions