This guide covers the simple setup and flight instructions for Premier Squeaky Kite designs. No assembly is needed; attach the flying line, check the tow loop, and fly in the recommended wind range.

Applies to: Squeaky Kite - Cool, Hot, and Tie Dye. See the 3 products this guide covers.

Specifications

Designs Size Wind range Fabric Frame Line
Cool, Hot, Tie Dye 20 x 80 in. / 51 x 203 cm. 5 ~ 18 mph Ripstop Polyester Solid Fiberglass Includes 300 ft. 20 lb. Test Line & Winder

Set up the kite

Step 1: Attach the flying line

Attach the flying line to the tow point found at the bottom of the bridle line.

Use the tow loop at the bottom of the bridle line. The bridle lines run from the kite to the tow loop, and the flying line runs from the winder to that loop.

Squeaky Kite tow loop, flying line, and bridle lines on the octopus kite
Tow loop, flying line, and bridle lines.

Step 2: Get ready to fly

Kite is now ready to fly.

Step 3: Adjust the tow loop if needed

Since wind conditions will vary, a slight adjustment in the location of the tow loop may improve the flying characteristics of the kite. Simply loosen the knot and move the loop half an inch up for high wind or half an inch down for lower wind conditions.

The tow loop sits on the bridle line ahead of the kite’s head. After any adjustment, the flying line still attaches to that tow loop.

Flight instructions

Step 1: Attach the flying line

Attach flying line to Tow Loop.

The tow loop is the same loop shown at the bottom of the bridle line.

Step 2: Position the kite for launch

Have a friend stand about 50 ft. downwind from you and hold the kite with its Leading Edge pointed towards the sky.

Your friend should be about 50 ft. downwind from you, holding the kite with its Leading Edge pointed towards the sky.

Step 3: Release the kite

As the wind catches the kite, signal your friend to release it while you bring in the line with long steady pulls.

Step 4: Let out line

Slowly let out more line as the kite flies upward.

Optimum wind conditions

Beaufort scale Description M.P.H.
Calm Smoke vertically 0
Light Air Direction of wind shown by smoke, but not by wind vanes 1, 2, 3
Light Breeze Wind felt on face, leaves rustle, ordinary vane moves 4, 5, 6, 7
Gentle Breeze Leaves and small twigs in constant motion; wind extends light flag 8, 9, 10, 11, 12
Moderate Breeze Raises dust and loose paper; small branches move 13, 14, 15, 16, 17, 18
Fresh Breeze Small trees & leaves begin to sway; crested wavelets form on inland water 19, 20, 21, 22, 23, 24
Strong Breeze Large branches in motion; utility wire whistle; windows rattle 25, 26, 27, 28, 29, 30
Squeaky Kite Beaufort scale with Squeaky the Octopus wind range marked
Optimum wind conditions for Squeaky the Octopus.

Best wind for Squeaky the Octopus: 5-18 mph. Wind conditions aloft may vary considerably from those found near ground level.

Products this guide covers

Download the original manual

Squeaky Kite Assembly Instructions (PDF)

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.