This guide covers assembly for Premier Swimming Fish wind garden designs. It shows how to attach the fish to the Spring Swivel Arm, install the Support Pole, and set the Ground Stake.

Applies to: Swimming Fish designs: Angelfish, Bass, Black & White, Clown Fish, Damsel Fish, Fairy Basslet, Flame Fish, Powder Surgeon, Threadfin. See the 9 products this guide covers.

Optional accessories

  • Heavy Duty Ground Stake with Extension Pole
  • 3/8" Deck Mount
  • 1/2" Deck Mount with Extension Pole

Assembly

Step 1: Hook the fabric loop

Hold the Spring Swivel Arm above the fish as shown. Hook the tip of the metal spiral into the back of the fabric loop and swing the Swivel Arm around in one complete circle. (diagrams A & B)

Keep the Spring Swivel Arm above the fish, with the metal spiral at the end of the arm and the fabric loop on the back of the fish. Swing the Spring Swivel Arm clockwise one complete circle to connect the fish loop into the spiral hook.

Swimming Fish diagram showing the spiral hook entering the back fabric loop.
A: Hook the spiral into the back of the fabric loop.
Swimming Fish diagram showing the swivel arm rotating clockwise around the fish.
B: Rotate the arm clockwise one complete circle.

Step 2: Install the Spring Swivel Arm

Pull the stopper off the top of the Upper Support Pole and slide the Spring Swivel Arm onto the Support Pole. Replace the stopper to hold the Arm into place. (diagram C)

The Spring Swivel Arm slides down onto the Upper Support Pole from the top. Put the stopper back above the arm so the arm is held in place on the pole.

Swimming Fish diagram showing the swivel arm on the support pole and mouth string clasp.
C: Install the swivel arm and clasp the mouth string.

Step 3: Clasp the mouth string

Clasp the string from the fish's mouth between the two stoppers on the Support Pole. (diagram C)

The mouth string runs from the front of the fish to the Support Pole. Fasten it between the two stoppers on the Support Pole.

Step 4: Set the Ground Stake and poles

Pound Ground Stake into ground and insert non-ferruled end of Support Pole into Ground Stake. Insert Upper Support Pole into Lower Support Pole. (diagram D). Enjoy your Swimming Fish!

The Lower Support Pole stands in the Ground Stake. In the finished setup, the Upper Support Pole fits into the Lower Support Pole and the fish hangs from the arm at the top.

Swimming Fish diagram showing the Upper Support Pole inserted into the Lower Support Pole and the Support Pole inserted into the Ground Stake.
D: Insert the non-ferruled end of the Support Pole into the Ground Stake, then insert the Upper Support Pole into the Lower Support Pole.

Care and weather note

Please note: Although your Swimming Fish is constructed with UV resistant SolarMax™ fabric, it is recommended that you take it inside during storms and harsh weather to preserve its durability.

Products this guide covers

Download the original manual

Swimming Fish Assembly Instructions (PDF)

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.