This guide covers assembly for Premier Traditional Bird Spinner designs with wing fins and a ground shaft. It applies to the Flying Mallard Spinner and the 34 in. Pink Flamingo Spinner.
Applies to: Flying Mallard Spinner and 34 in. Pink Flamingo Spinner. See the 2 products this guide covers.
Specifications
| Model | Spinner platform | Size (W x L) |
|---|---|---|
| 34 in. Pink Flamingo Spinner | Traditional Bird | 34 in. x 35 in. |
| Flying Mallard Spinner | Traditional Bird | 43.5 in. x 40 in. |
Assembly
Step 1: Attach the wing fins
Attach Wing Fins to Wing Hub. Please note that Wing Fins are inserted at an offset pattern. Make sure Wing Fins are fully inserted into hub holes. You will hear a “click” sound when the pins are all the way in.
The Wing Fin Pin goes into the Hub Hole on the Wing Hub. Work around the hub so the Wing Fins follow the offset pattern.
Tip: If you make a mistake in the placement of the Wing Fins (i.e. backward, wrong color sequence, etc.), you can remove them by carefully inserting a small flat end screwdriver between the base of the Wing Fin Pin and the hub and pushing it up and out.

Step 2: Set the spinner on the ground shaft
Drive Ground Stake into ground. Slide Ground Shaft into Ground Stake. Slide Main Hub Assembly with Garden Spinner over Ground Shaft Ferrule. If you desire extra height, add extra ground shaft included in this package.
The Ground Stake sits in the ground with the Ground Shaft upright above it. The Ground Shaft Ferrule sits on the shaft below the spinner.

Care and storage
Although your Garden Spinner is constructed with UV resistant SolarMax™ fabric, to preserve its durability, we recommend taking spinner inside during harsh weather.
Products this guide covers
Download the original manuals
Premier prints a manual for each design; the steps are the same apart from the differences noted above.


34 in. Pink Flamingo Spinner
Flying Mallard Spinner
Share:
Teardrop Camper Spinner Assembly Instructions
Tricycle Spinner Assembly Instructions