This guide covers assembly for the Premier Whirly Wing Flower Spinner - Fantasy. It shows how to join the support pole, attach the flower petal wings, and place the spinner in the ground stake.
Applies to: Whirly Wing Flower Spinner - Fantasy. See the 1 products this guide covers.
Assembly
Step 1: Assemble the support pole
Slide the wide end of the Unferruled Support Pole into the Support Pole Ferrule. Slide Support Pole Leaves down over Ferrule until they fit snugly. (Diagram A)
The ferrule belongs between the two support pole sections. The support pole leaves sit above the ferrule when this step is finished.

Step 2: Attach the hub and flower petals
Slide the narrow end of Unferruled Support Pole into Star Lock Hub. Push the Support Pole until it locks into place and can not be removed. Untie the Flower Petals and slide the hub onto the diagonal axle. Secure the Flower Petals in place with the end cap. (Diagram B)
The Star Lock Hub sits on the narrow end of the support pole, with the diagonal axle extending out toward the end cap. The flower petal wings go on that diagonal axle between the hub and the end cap.
Tip: Please note: The flatter edge of the wings should slide onto the axle first. The more sloped edge of the wing should go towards the front.

Step 3: Place the spinner in the ground stake
Drive Ground Stake into ground. Slide assembled Whirly Wing Flower Spinner into Ground Stake. (Diagram C)
Leave the top of the ground stake accessible above the ground so the assembled support pole can slide into it. When placed, the flower head sits above the support pole and leaves.

Care and weather
Please note: It is recommended that you take your Whirly Wing Spinner inside during storms and harsh weather to preserve its durability.


Whirly Wing Flower Spinner - Fantasy
Share:
WhirliGig Spinner Assembly Instructions
Whirly Wing Spinner Assembly Instructions