This guide covers the shared assembly steps for Premier WindGarden flying spinners. Use the notes in each step for designs with a different body rod, body half, or support setup.
Applies to: Premier WindGarden bird, bug, animal, character, and UH-34 Marine Helicopter spinners. See the 34 products this guide covers.
Product sizes
| Product | Premier category | Size (W x L) |
|---|---|---|
| 21 in. Pink Flamingo Spinner | Traditional Bird | 21 in. x 28 in. |
| 22 in. Dragonfly Spinner | Traditional Bug | 22 in. x 24 in. |
| 23 in. Bluebird Spinner | Traditional Bird | 23 in. x 26 in. |
| 23 in. Flying Pig Spinner | Flying Animal | 23 in. x 27 in. |
| 23 in. Osprey Spinner | Traditional Bird | 23 in. x 27 in. |
| 23 in. Peregrine Falcon Spinner | Traditional Bird | 23 in. x 27 in. |
| 24 in. Ruby Throated Hummingbird | Traditional Bird | 24 in. x 24 in. |
| 25 in. Eastern Blue Jay Spinner | Traditional Bird | 25.5 in. x 26 in. |
| 26 in. Morning Rooster Spinner | Traditional Bird | 17 in. x 28 in. |
| 26 in. Pelican Spinner | Traditional Bird | 26 in. x 26 in. |
| 27 in. Bay Horse Spinner | Flying Animal | 26 in. x 26 in. |
| 27 in. Flying Loon Spinner | Traditional Bird | 27 in. x 26 in. |
| 27 in. Scarlet Macaw Spinner | Traditional Bird | 27 in. x 26 in. |
| 28 in. Shark Spinner | Traditional Spinner | 28 in. x 9 in. |
| 30 in. Flying Pig Spinner | Flying Animal | 30 in. x 32 in. |
| 30 in. Great Blue Heron Spinner | Traditional Bird | 30 in. x 26 in. |
| 31 in. Flying Bee Spinner | Traditional Bug | 31 in. x 13.5 in. |
| 31 in. Flying Osprey Spinner | Traditional Bird | 31 in. x 28 in. |
| 35 in. Brown Pelican Spinner | Traditional Bird | 35 in. x 27.5 in. |
| 35 in. Flying Eastern Blue Jay Spinner | Traditional Bird | 35 in. x 32 in. |
| 43 in. Flying Eagle Spinner | Traditional Bird | 43.5 in. x 40 in. |
| Democrat Donkey | Flying Animal | 26 in. x 27 in. |
| Flying Barn Owl Spinner | Traditional Bird | 24 in. x 27 in. |
| Flying Chickadee Spinner | Traditional Bird | 35 in. x 28 in. |
| Flying Dragon Spinner | Flying Spinner | 39 in. x 34 in. |
| Flying Raven Spinner | Traditional Bird | 29.5 in. x 26 in. |
| Flying Seagull Spinner | Traditional Bird | 34 in. x 27.5 in. |
| Flying Witch Spinner | Halloween | 32.5 in. x 26.5 in. |
| Flying Wizard Spinner | Flying Spinner | 33 in. x 27.5 in. |
| Griffin Spinner | Flying Spinner | 29 in. x 27 in. |
| Helicopter Spinner - UH-34 Marine | Helicopter | 28 in. x 24 in. |
| Large Lady Rainbow Monarch Spinner | Traditional Bug | 31 in. x 36 in. |
| North American Cardinal Spinner | No specs provided | No specs provided |
| Wood Duck Spinner | Traditional Bird | 23 in. x 27 in. |
Assembly
Step 1: Assemble the body strut
For designs that use a Front Body Half and Front Body Rod, open the Velcro closure on the Front Body Half and insert the Front Body Rod into the Main Hub within the fabric sleeve of the Front Body Half. Reclose the Velcro closure. The completed Strut Assembly should match Diagram A.
If your manual includes a body-strut step, use its labeled parts to match the strut layout shown in Diagram A.
Tip: Lady Rainbow Butterfly uses the Back Body Half and Back Body Rod into the Wing Hub; Witch uses the Back Body Half and Back Body Rod into the Front Body Assembly; Pink Flamingo uses the Body Sleeve, slides the Vertical Support Pole through the leg, and positions the ferrule over the Main Hub Pole; Morning Rooster uses the Main Vertical Strut. Dragonfly, Wood Duck, Peregrine Falcon, Bluebird, and Osprey come completely assembled; UH-34 Marine Helicopter begins with the wing fins.

Step 2: Attach the wing fins
Attach Wing Fins to Wing Hub. Please note that Wing Fins are inserted at an offset pattern. Make sure Wing Fins are fully inserted into hub holes. You will hear a “click” sound when the pins are in all the way. (as shown in the wing-fin diagram(s))
Each Wing Fin Pin goes into a Hub Hole on the Wing Hub. Assemble with the offset pattern; the non-offset placement is marked “Wrong Way!!”
Tip: If you make a mistake in the placement of the Wing Fins (i.e. backward, wrong color sequence etc.), you can remove them by carefully inserting a small flat end screwdriver between the base of the Wing Fin Pin and the hub and pushing it up and out. UH-34 Marine Helicopter: the spinner parts are Helicopter Propeller (5).
Step 3: Set the spinner on the support pole
Drive Ground Stake into ground. Slide Support Pole into Ground Stake. Slide Main Hub Assembly with Garden Spinner over Support Pole Ferrule. On manuals that include the extra-height note, if you desire extra height, add the extra ground shaft included in that package.
The Ground Stake goes into the ground first, with the Support Pole above it. The Support Pole Ferrule is at the top, where the Main Hub Assembly with the Garden Spinner sits on the pole.
Tip: If your manual phrases the last connection this way, slide the Main Hub Assembly into the Support Pole Ferrule. UH-34 Marine Helicopter: the manual does not include the extra-height ground shaft note.
Care and storage
Although your Garden Spinner is constructed with UV resistant SunTex™ fabric, take it inside during storms or harsh weather to preserve its durability; some manuals also recommend taking the Spinner inside when not in use.
Products this guide covers
21 in. Pink Flamingo Spinner
22 in. Dragonfly Spinner
23 in. Bluebird Spinner
23 in. Flying Pig Spinner
23 in. Osprey Spinner
23 in. Peregrine Falcon Spinner
24 in. Ruby Throated Hummingbird
25 in. Eastern Blue Jay Spinner
26 in. Morning Rooster Spinner
26 in. Pelican Spinner
27 in. Bay Horse Spinner
27 in. Scarlet Macaw Spinner
28 in. Shark Spinner
30 in. Flying Pig Spinner
31 in. Flying Bee Spinner
31 in. Flying Osprey Spinner
35 in. Brown Pelican Spinner
35 in. Flying Eastern Blue Jay Spinner
43 in. Flying Eagle Spinner
Democrat Donkey
Flying Barn Owl Spinner
Flying Chickadee Spinner
Flying Dragon Spinner
Flying Raven Spinner
Flying Seagull Spinner
Flying Witch Spinner
Flying Wizard Spinner
Griffin Spinner
Helicopter Spinner - UH-34 Marine
Large Lady Rainbow Monarch Spinner
North American Cardinal Spinner
Wood Duck Spinner
27 in. Flying Loon Spinner
30 in. Great Blue Heron Spinner
Download the original manuals
Premier prints a manual for each design; the steps are the same apart from the differences noted above.
- 25 in. Eastern Blue Jay Spinner (PDF)
- 27 in. Scarlet Macaw Spinner (PDF)
- 30 in. Flying Pig Spinner (PDF)
- North American Cardinal Spinner (PDF)
- 30 in. Great Blue Heron Spinner (PDF)
- 24 in. Ruby Throated Hummingbird (PDF)
- Large Lady Rainbow Monarch Spinner (PDF)
- 21 in. Pink Flamingo Spinner (PDF)
- Flying Raven Spinner (PDF)
- 43 in. Flying Eagle Spinner (PDF)
- 35 in. Flying Eastern Blue Jay Spinner (PDF)
- Flying Barn Owl Spinner (PDF)
- 31 in. Flying Osprey Spinner (PDF)
- 35 in. Brown Pelican Spinner (PDF)
- 27 in. Flying Loon Spinner (PDF)
- Flying Chickadee Spinner (PDF)
- Flying Seagull Spinner (PDF)
- 26 in. Pelican Spinner (PDF)
- 23 in. Flying Pig Spinner (PDF)
- 27 in. Bay Horse Spinner (PDF)
- Flying Witch Spinner (PDF)
- Democrat Donkey (PDF)
- Flying Dragon Spinner (PDF)
- Griffin Spinner (PDF)
- 31 in. Flying Bee Spinner (PDF)
- Flying Wizard Spinner (PDF)
- 28 in. Shark Spinner (PDF)
- 26 in. Morning Rooster Spinner (PDF)
- Wood Duck Spinner (PDF)
- 22 in. Dragonfly Spinner (PDF)
- 23 in. Peregrine Falcon Spinner (PDF)
- 23 in. Bluebird Spinner (PDF)
- 23 in. Osprey Spinner (PDF)
- Helicopter Spinner - UH-34 Marine (PDF)


Share:
Wind Generator Assembly Instructions
Windmill Spinner Assembly Instructions