Assembly Instructions

7 ft. Shark Kite Assembly Instructions

This guide covers basic setup and flying for the Premier 7 ft. Shark Kite. Use this guide for the black 7 ft. Shark Kite with the head stiffener strut shown in the manual.

Read moreabout 7 ft. Shark Kite Assembly Instructions

6.5 ft. Wind Generator Assembly Instructions

Use this guide to assemble and care for Premier 6.5 ft. Wind Generators. It covers the Flames, Open, Patriotic, Rainbow and Sale designs.

Read moreabout 6.5 ft. Wind Generator Assembly Instructions

56 in. Rokkaku Kite Assembly Instructions

This guide covers assembly and basic flight instructions for Premier 56 in. Rokkaku kites. It applies to the Rainbow Bubbles, Rainbow Orbit and Sea Turtles designs.

Read moreabout 56 in. Rokkaku Kite Assembly Instructions

56 in. Delta Kite Assembly Instructions

This guide covers assembly and flying instructions for Premier 56 in. Delta kites. It shows how to identify and install the Cross Strut, attach the flying line, and check wind conditions.

Read moreabout 56 in. Delta Kite Assembly Instructions

52 in. Travel Diamond Kite Assembly Instructions

This guide covers assembly and flying for Premier's 52 in. Travel Diamond Kite designs. It applies to the Hot Tronic, Orbit Tron, and Tecmo Tron versions.

Read moreabout 52 in. Travel Diamond Kite Assembly Instructions

5 ft. Shark Kite Assembly Instructions

This guide covers assembly and flying for the Premier 5 ft. Shark Kite in black. It shows where to place the cross strut, head stiffener strut, and flying line before launch.

Read moreabout 5 ft. Shark Kite Assembly Instructions

40 in. New Holland Tractor Spinner Assembly Instructions

This guide covers assembly of the 40 in. x 27 in. New Holland Tractor Spinner. Connect the struts, install the spinner wheels, and set the spinner on its support pole according to the Premier manual.

Read moreabout 40 in. New Holland Tractor Spinner Assembly Instructions

4 Legged WhirliGig Spinner Assembly Instructions

This guide covers assembly for Premier 4 Legged WhirliGig Spinners in the dog and alligator designs. It includes the axle, spinner set, support pole, and ground stake steps for the smaller and large versions.

Read moreabout 4 Legged WhirliGig Spinner Assembly Instructions

3D Shark Kite Assembly Instructions

This guide covers assembly and basic flying for Premier 3D Shark Kites. It applies to both the 7 ft. and 11 ft. versions, with size-specific differences noted in the steps.

Read moreabout 3D Shark Kite Assembly Instructions